The “iPad Unavailable” screen error can have several causes, so the solution will depend on the specific issue. Here are a few potential solutions to try:
1. Force restart the iPad by pressing and holding the Home button and the Power button until the Apple logo appears.
2. Connect the iPad to a computer and use iTunes to update or restore the device.
3. Check for iOS updates and install any available updates.
4. Check for any issues with your Wi-Fi connection and make sure it is stable.
5. Try resetting your iPad’s settings by going to Settings > General > Reset > Reset All Settings.
6. Try putting the iPad in DFU mode and restoring it using iTunes. To do this, connect the iPad to a computer, turn off the device, and press and hold the Home button and the Power button for 10 seconds. Release the Power button but keep holding the Home button until the device enters DFU mode.
7. Try wiping the iPad with iTunes recovery mode, if you are unable to put it in DFU mode.
8. If the iPad is stuck on the “Connect to iTunes” screen, you can try connecting it to iTunes and restoring it.
9. If the above steps don’t work, try contacting Apple support for further assistance. They may be able to help you diagnose and fix the issue.
It’s important to note that, before trying any of these solutions, it’s a good idea to back up your iPad’s data, just in case something goes wrong during the process.
Why does my iPad say iPad unavailable?
There are several reasons why an iPad may display the “iPad Unavailable” screen error, including:
1. iOS software issues: The iPad may be experiencing a software issue that is preventing it from functioning properly.
2. Connectivity issues: The iPad may not be able to connect to the internet, either due to a problem with the Wi-Fi connection or a cellular data issue.
3. Hardware issues: There may be an issue with the iPad’s hardware that is causing it to malfunction. This could be a problem with the battery, the charging port, or another component.
4. Jailbreak: If your iPad is jailbroken, it may cause unexpected issues and lead to the “iPad Unavailable” screen error.
5. iTunes restore: If the iPad is restoring from iTunes, it may display the “iPad Unavailable” screen error.
6. Stuck on Apple logo: if the iPad is stuck on the Apple logo, it may display the “iPad Unavailable” screen error.
These are some of the common reasons why an iPad might display the “iPad Unavailable” screen error. It’s important to first try basic troubleshooting, such as restarting the device, checking for updates, and connecting to a different network, before attempting more advanced solutions.
How to Reset a Disabled iPad without iTunes via iCloud ?
If your iPad is disabled and you don’t have access to a computer with iTunes, you can try resetting it using iCloud. Here’s how:
1. On another device or computer, go to iCloud.com and sign in with your Apple ID and password.
2. Click on “Find My” and then select “All Devices” at the top of the screen.
3. Locate the disabled iPad and select it.
4. Click on “Erase iPad” and confirm the action. This will erase all data and settings from the iPad, including any passcode.
5. After the iPad is erased, it will restart and be in the setup wizard.
6. You can then set up the iPad as new, or restore from an iCloud backup.
Please note that if the iPad is in lost mode, you need to enter the passcode to confirm the action. Also, if you have two-factor authentication enabled for your Apple ID, you may need to verify your identity with a trusted device or phone number before you can erase the iPad remotely.
It’s always good to have a backup of your iPad, before resetting it.
How to Unlock a Disabled iPad without iTunes via Tenorshare 4uKey
Tenorshare 4uKey is a third-party software that can be used to unlock a disabled iPad without using iTunes. Here’s a general overview of how to use it:
1. Download and install Tenorshare 4uKey on your computer.
2. Connect your disabled iPad to the computer using a USB cable.
3. Open Tenorshare 4uKey and select “Unlock iTunes Backup” from the main menu.
4. The software will detect your iPad and display information about it. Click on “Start” to begin the unlocking process.
5. Follow the on-screen instructions to put your iPad into DFU mode.
6. Once the iPad is in DFU mode, Tenorshare 4uKey will begin the unlocking process. This may take a few minutes to complete.
7. After the process is complete, your iPad should be unlocked and you can set it up as new or restore from a backup.
Please note that using third-party software to unlock a disabled iPad may void the device’s warranty and may cause damage to your iPad if not done correctly. It’s always better to contact the Apple support if you have any doubts.
How to Restore Disabled iPad without iTunes
If your iPad is disabled and you don’t have access to a computer with iTunes, you can try restoring it using iCloud. Here’s how:
1. On another device or computer, go to iCloud.com and sign in with your Apple ID and password.
2. Click on “Find My” and then select “All Devices” at the top of the screen.
3. Locate the disabled iPad and select it.
4. Click on “Erase iPad” and confirm the action. This will erase all data and settings from the iPad, including any passcode.
5. After the iPad is erased, it will restart and be in the setup wizard.
6. You can then set up the iPad as new, or restore from an iCloud backup.
7. If you have an iCloud backup, sign in with your Apple ID on the iPad and follow the instructions to restore your iPad from iCloud.
Please note that restoring a disabled iPad using iCloud will erase all data and settings from the device. It’s always good to have a backup of your iPad, before restoring it.
It’s also important to note that if the iPad is in lost mode, you need to enter the passcode to confirm the action. Also, if you have two-factor authentication enabled for your Apple ID, you may need to verify your identity with a trusted device or phone number before you can erase the iPad remotely.
Also Read: The Smart Switch APK For Seamless Data Sharing-Smart Switch APK
Common questions about unlocking disabled iPad
Here are some common questions and answers about unlocking a disabled iPad:
Q: What does it mean when an iPad is disabled?
A: When an iPad is disabled, it means that the device has been locked due to too many failed attempts to enter the passcode. This is a security feature to prevent unauthorized access to the device.
Q: How many times can I enter the wrong passcode before my iPad is disabled?
A: The number of times you can enter the wrong passcode before your iPad is disabled depends on your device’s settings. By default, after six failed attempts, the iPad will be disabled for 1 minute, and after 7 attempts it will be disabled for 5 minutes. If you enter the wrong passcode for 10 times, the iPad will be disabled.
Q: How can I unlock a disabled iPad?
A: You can unlock a disabled iPad using iTunes, iCloud, or a third-party software like Tenorshare 4uKey. Each method has its own set of steps and requirements, and it’s important to carefully follow the instructions to avoid causing damage to the device.
Q: Can I unlock a disabled iPad without a computer?
A: The only way to unlock a disabled iPad without a computer is by erasing all the data on the device through iCloud, which will restore the iPad to its original factory settings.
Q: Will restoring a disabled iPad erase all my data?
A: Yes, restoring a disabled iPad will erase all data and settings from the device. It’s important to have a backup of your iPad before restoring it.
Q: Will using a third-party software to unlock my disabled iPad void the warranty?
A: Yes, using third-party software to unlock a disabled iPad may void the device’s warranty. It’s always recommended to contact the Apple support if you have any doubts.
