Zumimall security camera is the first and only outdoor WiFi security camera that lets you view live video from anywhere in the world, on your mobile device, tablet, or computer. In addition, it is easy to use, self-install and comes with free cloud storage. Indeed, outdoor WiFi camera sends you email and text alerts if it detects motion. You can use the app to set the camera to record video for you when it detects motion. However, an outdoor WiFi security camera is a great option for homes with large yards or areas that are difficult to reach. Our security cameras are also a great way to keep an eye on children, the elderly, or pets.
Moreover, the Zumimall outdoor camera includes a built-in speaker and microphone, allowing for clear 2-way audio communication with anyone in the camera’s live view. Besides, it has a 36mm lens and 120° viewing angle that outputs high-resolution 1080P pictures. Our security cameras use clever detecting technology to discriminate between persons and things, keeping you safe from false alarms. This blog will walk through some common reasons and troubleshooting tips for Zumimall security camera not detecting motion.
Why Outdoor WiFi Camera Not Detecting Motion?
Many people ask, why is Zumimall outdoor security camera Not Detecting Motion? However, this camera will also use the motion detection technology to monitor for motion or movement. But if the camera is set up near a window, curtain, or other bright light sources. In addition, this may effect the camera to have trouble detecting motion. The solution is to simply move the camera to a dark area where there is little to no light and then the problem will resolve. Here are some reasons:
- Your camera may not have power
- Even if your security camera is not connected to the WiFi network, it will not detect motion.
- If your camera has a battery, it may be that the battery is low.
- Another reason could be that the firmware version of the camera is outdated.
- Even if your camera is not in range of the WiFi network, then the problem is obvious.
How to troubleshoot Outdoor WiFi Camera Not Detecting Motion?
If your security camera doesn’t detect motion, then don’t worry.
Some solutions will also available below which you can follow. After following these solutions, your security camera will start detecting motion. Let us start with the solution.
Adjust the Zumimall security camera antennas
The first solution to resolve the security camera, you have to check the antennas. You have to check to see that the camera’s antennas will securely fasten and not loose. Point them in the direction of your WiFi router. The antennas does not mount on the camera when it will set. Once the wireless camera will install, make sure the antennas does properly tight. By following this step the issue like zumimall camera not connecting issue also fix.
Check the security camera connection and power
A problem can be as simple as connection loss, or it could be that the down network. LED indicators are commonly employed in Internet protocol (IP) cameras to transfer data over networks, however, this may be disguised within the camera.
If the camera’s LED lights does not blinking, you will need to check to see if it will have power or plug into the wall. If your wireless camera will attach by electricity switch rather than a battery. You should ensure that it is receiving the proper electricity, since a sophisticated camera, such as a pan-tilt-zoom, would require more watts than a standard socket can provide. If the WiFi Extender Not Connecting with the camera then you need to connect it.
Disconnect the outdoor WiFi Camera from the Power Cycle
The third thing to attempt to bring your camera back online is to unplug it from the power supply. Unplug the camera and set it aside for a few minutes before plugging it back in. If it doesn’t work the first time, try it again and again before going on to the next advice. Power cycling the device in this manner should put any software glitches to rest and can resolve an overheating issue.
Update the latest firmware version
To resolve the motion detection error, you have to update the latest firmware. To update the firmware, you have to visit the official website of this camera. After that, search the firmware. If a new firmware version update is available, please update it.
Reset the Outdoor CCTV camera
The next step is to conduct a factory reset on your Zumimall outdoor WiFi camera. Find the user guide that comes with it. If you don’t have the handbook, most current product instruction manuals may be access online at the manufacturer’s website. Once you have the handbook in front of you, repeat the camera set-up steps to reset your camera to factory settings.
